Moxi Version 4.1 - Manual (Page 40)

all DVRs were not created equal
Changing settings
© 2006 by Digeo, Inc. All rights reserved. Media Center User Guide
33
3
Audio Output
Change the audio output type to match your audio connection and
equipment (see table 2).
The media center can output sound in Dolby Digital, stereo, or mono.
1. To change the audio setting, go to the Audio Output card in the
Settings category.
2. Choose the desired output setting, and then choose close.
Figure 31: Changing the audio output
Table 2: Audio connections and selections
Audio connection Preferred selection
S/PDIF (coaxial or optical) Dolby Digital
RCA (red and white) Stereo
RF (some models) Mono
System and game sound effects do not play when audio output is
set to Dolby Digital.
3:55 10
record series
record once
watch
close
see all times
Set Relock Timer
Channels close
dolby digital
stereo
mono
Audio Output
If you use a S/PDIF output to a Dolby
Digital receiver or amplifier, choose dolby
digital (system or game soun effects won’t
play when tuned to Dolby Digital
programming).
If you use audio L R outputs (red and
white connectors), choose stereo.
If you use the RF “To TV” output (coax
cable) to your TV, or if you use audio L or
next 1 of 2