MACKIE SDR96 - Manual (Page 26)

26
SDR 24/96
SDR
24/
96
To purge a Project:
1. Press Project. Press the
Page Right button, and
in the Project Files Menu,
select Purge.
2. The Purge current project?
screen appears. Select OK to
delete files not referenced in the
project file, or Cancel to exit.
3. The PURGE: clear history?
screen appears. Select Yes to
clear the history list, No to leave
the history list intact and retain
files that are referenced in the history list, and Cancel to exit without
purging.
4. Purging project... appears in the display, followed by Project purged to
confirm that the project was successfully purged.
Basic Transport Operations
The SDR24/96 transport and recording controls are similar to those on most
multitrack tape recorders.
REWIND FAST FWD PLAY STOP RECORD
Fast Wind
REWIND and FAST FWD puts the SDR24/96 into fast wind mode from any
state. Fast Wind also punches out of record and cancels master record
standby. If there are unsaved recording passes, the recording passes and
project file are automatically saved to disk.
When pressed from stop, the “tape” rolls slowly at first, then accelerates to
20X speed in four seconds. Pressing the button a second, third, fourth, or
fifth time increases the winding speed still further.
♦ 1 press: Slow wind; 20X speed after four seconds
♦ 2 presses: 60X speed
♦ 3 presses: 180X speed
♦ 4 presses: 540X speed
♦ 5 presses: 1620X speed
Stop
STOP brings the “tape” to an immediate halt. STOP also punches out of
record and cancels master record standby. If there are unsaved recording
passes, the recording passes and project file are automatically saved to disk.
When the transport is already stopped, pressing STOP twice within one
second moves the current locator to the beginning of the project.
PROJECT
PROJECT FILES MENU >
New Open Save SaveAs
< PROJECT FILES MENU
Delete Copy Rename Purge
Purge current project?
OK Cancel
PURGE: clear history?
Yes No Cancel