MACKIE SDR96 - Manual (Page 39)

39
Operation Guide
Oper
a
tion
Guide
SETUP MENU >
Record I/O Sync Transp
< SETUP MENU
Disk System
SYSTEM MENU >
USBMS SDRSw RemSw Load
SDR FOOTSW: Stop/Play
<< >> OK
REMOTE FOOTSW: Stop/Play
<< >> OK
SETUP
Footswitch Operation
Using a footswitch with the SDR24/96 gives you hands-free access to several of
the most-used SDR24/96 functions. The footswitch is extremely handy when you
want to use your hands for other tasks, like playing your instrument, working the
console, or eating pizza. Punching in and out is probably the most common use of
the footswitch, but it can stop and play as well.
Punch punches-in just like pressing PLAY + RECORD and punches-out like
pressing PLAY. When playing, hitting the footswitch punches-in all armed
tracks. When recording, hitting the footswitch again punches-out of Record,
but leaves the transport in Play.
Stop/Play toggles the transport between PLAY and STOP. When the
Transport is stopped, it puts it into play; when moving, it stops the Transport.
To assign the footswitch function:
1. The footswitch function
is assigned in the System
menu, under SDR
Footswitch
(SETUP:Page
Right:System:SDRSw
).
2. Use the << / >> buttons to
select Stop/Play or Punch,
then select OK to assign the
footswitch function.
If you have a Remote 24 connected to
the SDR24/96, you can independently assign the remote footswitch function:
To assign the remote footswitch function:
1. The remote footswitch function is assigned in the System menu, under
Remote Footswitch (SETUP:Page Right:System:RemSw).
2. Use the << / >> buttons to
select Stop/Play or Punch,
then select OK to assign the
footswitch function.
OUT IN IN
IN
OUT
OUT
DIGITAL WORD CLOCK I/O MIDI
ADAT SYNC
IN
ADAT SYNC
OUT
SERIAL
9-PIN
FOOT
SWITCH
SMPTE MICRO/
REMOTE 24
CNTRL
ANALOG OUT 1 - 8 ANALOG OUT 9 - 16 ANALOG OUT 17 - 24
ANALOG IN 1 - 8 ANALOG IN 9 - 16 ANALOG IN 17 - 24
RISK OF ELECTRIC SHOCK DO NOT OPEN
REPLACE WITH THE SAME TYPE FUSE AND RATING.
DISCONNECT SUPPLY CORD BEFORE CHANGING FUSE UTILISE UN FUSIBLE DE RECHANGE DE MÊME TYPE.
DEBRANCHER AVANT DE REMPLACER LE FUSIBLE
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION SERIAL NUMBER MANUFACTURING DATE
AVIS: RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR CONCEIVED, DESIGNED, AND MANUFACTURED BY MACKIE DESIGNS INC • WOODINVILLE • WA 98072 • USA MADE IN USA • FABRIQUE AU USA • PATENTS PENDING COPYRIGHT ©1998 THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF MACKIE DESIGNS INC.: "MACKIE.", MACKIE DIGITAL SYSTEMS AND THE "RUNNING MAN" FIGURE.
POWER
USB 1 - 8
IN OUT
DIGITAL
9 - 16
IN OUT
DIGITAL
17 - 24
X2
1-4
X2
5-8
X2
9-12
IN OUT
24 TRACK/24 BIT DIGITAL AUDIO RECORDER
HIGH RESOLUTION
NON-LINEAR RECORDER 96 SDR
100 - 240V 250mA
50/60Hz
Footswitch
FOOT
SWITCH
TO HDR
REMOTE JACK REMOTE 24
DO NOT PLUG INTO
ETHERNET
WARNING