Miller Electric 812 - Manual (Page 24)

.
A complete Parts List is available at www.MillerWelds.com
OM-278 Page 16
4-11. Mig (GMAW) Cable Connections
Polarity: For Electrode Positive (DCEP),
connect weld cables as shown. For
Electrode Negative (DCEN), typical for
Gasless Flux Cored Welding, reverse cable
connections at welding power source.
Gas Flowmeter/
Regulator
Rear Of
Wire Feeder
+ + −
HIGH
INDUCTANCE
LOW
INDUCTANCE
or
! Turn Off power before making connections.
.
For better performance for most GMAW (DCEP and DCEN)
applications, it is recommended that weld output connec-
tions be made to the Low Inductance weld output terminal.