Miller Electric 812 - Manual (Page 25)

.
A complete Parts List is available at www.MillerWelds.com
OM-278 Page 17
4-12. Mig (GMAW) And Flux Cored (FCAW) Cable Connections
Gas Flowmeter/
Regulator
Rear Of
Wire Feeder
+ + −
HIGH
INDUCTANCE
LOW
INDUCTANCE
or
GMAW / FCAW
Rear Of
Wire Feeder
+ + −
LOW
INDUCTANCE
FCAW (Gasless)
(Gasless FCAW)
(Gasless FCAW)
! Turn Off power before making connections.
.
For better performance for most GMAW and (gas shielded)
FCAW (DCEP) applications, it is recommended that weld
output connections be made to the Low Inductance weld
output terminal. Make connections as shown.
! Turn Off power before making connections.
.
For better performance for most Gasless Flux Cored FCAW
(DCEN) applications, it is recommended that weld output
connections be made to the Low Inductance weld output ter-
minal. Make connections as shown.