Miller Electric Renegade 180 - Manual (Page 23)

.
Complete Parts List available at www. MillerWelds.com
OM-228 042 Page 19
5-5. Installing Welding Gun
804 755-B
1 Drive Assembly
2 Gun Securing Knob
3 Gun End
Loosen knob. Insert gun end
through opening until it bottoms
against drive assembly. Tighten
knob.
4
Gun Trigger Plug
Insert into receptacle, and tighten
threaded collar.
5
Mig Gun/Spool Gun Select
Switch
Place switch in position for gun be-
ing used.
Close door.
4
3
2
1
5
5-6. Work Cable Routing Inside Unit
804 755-B
1 Work Clamp Lead
2 Wire Drive Lead
3 Positive Output Terminal
4 Negative Output Terminal
Route work cable to output termi-
nal. See Section 5-7 for connec-
tions.
Close door.
3 1 4 2