MITSUBISHI ELECTRIC HS-U748 - Manual (Page 49)

47
Remote Control
VCR POWER
Turns the VCR on or off. If you have programmed
the VCR to record, you need to turn the VCR off.
EJECT
Ejects a tape.
CHANNEL Up and Down
Selects next higher or lower channel in the VCR’s
or TV’s channel memory.
VOLUME Up and Down
Raises and lowers the sound of the TV.
(Operates the TV only)
TV POWER
Turns the TV on or off. You need to program your
remote to operate your particular brand of television.
MUTE
Turns off the TV sound. Press again to restore the
TV sound to its previous volume. (Operates the TV
only)
Number keys
Selects TV stations.
Sets quick search (CM skip) time.
QUICK PROGRAM
Goes to Program to record menu.
Exits the programming screen.
INPUT
Select between the antenna and any other video
equipment that may be connected.
PLAY
Plays a tape.
2 1 3
5 4 6
8 7 9
0
CHANNEL
EJECT MUTE
VOLUME
VCR
POWER
TV
POWER
CM SKIP
QUICK PROGRAM INPUT
PLAY
STOP
REW FF
DISPLAY PAUSE
X2 REC
INDEX
AUDIO/VIDEO MENU
VCR/TV SP/EP
ADJUST
CANCEL ENTER
ADJUST
VCR
TV
STOP
Stops a tape.
REW
Rewinds a tape or reverse searches.
FF
Fast forwards a tape or fast forward searches.
VCR/TV slide switch
Operates the VCR when set to the VCR position, the
TV when set to the TV position. You need to
program your remote to operate your particular
brand of television.
REC
Starts recording. While recording, adds manual
index mark.
PAUSE
Pauses a tape when recording.
Freezes a frame when playing a tape.
DISPLAY
Displays on the TV screen:
• Time elapsed on the tape
• Time left on the tape, current time
• Channel number and audio reception mode
• Audio channel(s) selected
• Source supplying the VCR with a signal
• If the VCR is stopped, playing, or recording
Turns the Child Lock on and off.
X2
Use double speed playback when playing a tape.
INDEX I
\ \ \ \ \, ^ ^ ^ ^ ^
I
Begins index search forward and backward.
Controls the playback speed of a tape.
AUDIO/VIDEO
Selects the audio and video settings to be adjusted.
MENU
Displays the menus. Exits the menus.
CANCEL
Cancels menu selections.
Resets the counter display to “0h00m00s.”
ADJUST +, –
Selects and adjusts menu selections.
ENTER
Enters menu selections.
VCR/TV
Switches between the VCR’s picture and the TV’s
tuner.
SP/EP
Changes the recording speed (SP is standard play;
EP is extended play).
Location of Controls