MITSUBISHI ELECTRIC HS-U748 - Manual (Page 7)

5
Cable System with
Cable Box
Connecting Cable and Cable Box,
if all channels are scrambled
1 Connect cable from wall outlet to CABLE
IN on the cable box.
2 Connect OUT (or OUT TO TV) on the
cable box to ANTENNA IN on the VCR.
3 Connect ANTENNA OUT on the VCR to
the TV’s antenna jacks (varies by TV).
4 If your TV has audio video inputs,
continue with the connections on page 7.
If not, plug in power cords of VCR, TV,
and cable box.
If your cable company scrambles all of its
channels, you cannot record one channel
while watching another.
If your cable company only requires the use
of a cable box for some channels, connect
the cable box as shown on the next page.
VHF
UHF
VHF/UHF
ANTENNA
OUT
IN
x x
x x
VCR Rear Panel
TV Rear Panel
OR
Optional
UHF/VHF
Splitter
Optional 300 Ohm to 75 Ohm
Matching Transformer
Optional UHF/VHF Combiner
OR
supplied
coaxial cable
OR
From Antenna or
Cable wall outlet
IN OUT
VHF/UHF
VHF
UHF
ANTENNA
OUT
IN
TV Rear Panel
From Cable
wall outlet
Cable Box Rear Panel
coaxial cable provided
by cable company
supplied coaxial cable
VCR Rear Panel
OR
IMPORTANT
You must use one of the connections shown on page 5 and 6 in order to record television or cable
programs.
Antenna or Cable
System without
Cable Box
Connecting Antenna or Cable
1 Connect antenna or cable from wall
outlet to ANTENNA IN of the VCR.
2 Connect VCR ANTENNA OUT to
the TV’s Antenna jacks (varies by
TV).
3 If your TV has audio video inputs,
continue with the connections on
page 7. If not, plug in power cords
of VCR and TV.
Hooking Up Your VCR
IMPORTANT
Your TV Owner’s Guide may have additional suggestions for antenna/cable hookups.
If your TV has more than one antenna jack, ask your Mitsubishi dealer for advice on additional
accessories.