Back panel, Antenna, Ir emitter-netcommand – MITSUBISHI ELECTRIC WD-52527 User Manual

Page 18: Input-1, -2, Component-1, -2 inputs ypbpr, Hdmi, Ant-1 main, ant-2 aux), Chapter 1. television overview

Advertising
background image

18

Chapter 1. Television Overview

COMPONENT

YPbPr (480i/480p/720p/1080i)

INPUT

1

2

S-VIDEO

VIDEO

AUDIO-

LEFT/

(MONO)

AUDIO-

RIGHT

DTV/CABLE/

VHF/UHF

/

ANT 1 MAIN

ANT 2 / AUX

DIGITAL

AUDIO

OUTPUT

CableCARD™

USE WITH

ANT 1 CARD TOP

1

2

Y

Pb

Pr

AUDIO-

LEFT/

(MONO)

AUDIO-

RIGHT

OUTPUT

AUDIO

OUTPUT

RECORD

OUTPUT

DVI

Analog Audio

1

2

VIDEO

AUDIO-

LEFT/

(MONO)

AUDIO-

RIGHT

SERVICE

PORT

MONITORLINK™/HDMI

VIDEO 480i/480p/720p/1080i

AUDIO PCM LINEAR

1

2

IEEE 1394

INPUT/

OUTPUT

Net Command

IR EMITTER

¸

' ,INK

¸

INPUT























USE WITH

CableCARD

TM

ANT 1 / MAIN

ANT 2 / AUX

Back Panel

1. Antenna

(ANT-1 MAIN, ANT-2 AUX)

ANT-1 MAIN and ANT-2 AUX can each receive both digital and analog over-the-air channels from a VHF/UHF antenna

or non-scrambled digital/analog cable channels.

Your primary viewing signal source should be connected to ANT-1 MAIN. ANT-1 MAIN must be used to view premium

subscription cable TV service authorized by the CableCARD™ access card. The CableCARD access card is provided by
your local cable company. ANT-2 AUX can continue to receive over-the-air or non-scrambled cable signals.

2. IR Emitter-NetCommand

®

Two jacks are provided for connecting IR emitters. IR Emitters connected to these jacks are used by the NetCommand

system of the TV to control external analog devices such as VCRs, DVDs, cable boxes, satellite receivers and audio receivers.

3. Input-1, -2

Input 1 and 2 can be used for the connection of a VCR, Super VHS (S-VHS) VCR, DVD player, standard satellite receiver or
other A/V device to the TV. Please note that if S-VIDEO and VIDEO are available for the video input, you must choose to
connect only one. They cannot both be connected at the same time.

. Component-1, -2 Inputs YPbPr

(80i/80p/720p/1080i)

Component-3 is available on WD-52528 and WD-62628.

These inputs can be used for the connection of devices with component video outputs, such as a DVD player, external HDTV

receiver or compatible video game system. Please see Appendix B for signal compatibility.

5. HDMI™

The HDMI™ (High Definition Multimedia Interface) supports uncompressed standard and high definition digital video formats

and existing digital PCM audio formats. If using a cable box, the HDMI input supports both video and audio using a single
cable.

WD-52527
WS-62527

Advertising
This manual is related to the following products: