Appendix b: specifications, Tv specifications – MITSUBISHI ELECTRIC WD-52527 User Manual

Page 87

Advertising
background image

87

Chapter 6. Special Features

Appendix B: Specifications

TV Specifications

Projection System

3 LCD, 0.7” x 3, 1280 x 720 pixels

Lamp

110 watt high-pressure mercury discharge

Channel Frequency Reception

Over-the-Air: VHF 2 - 13, UHF 1 - 69
Analog Cable: 1 - 125
Digital Cable: 1 - 135

Channel Type

Over the Air: Analog NTSC, Digital ATSC with sub-channels
(all 18 video formats)
Cable: Analog NTSC (non-scrambled)
Digital QAM 6 and 256 with sub-channels (non-scrambled)
CableCARD™: Authorized scrambled and non-scrambled digital channels

Note for Digital Channels: The channel numbers displayed on-screen are determined by the broadcaster or cable
company and can vary from the standard frequency number. If there is no channel number information included from
the broadcaster or cable company, then the TV will create a channel number based on the frequency number as the
main channel number and the program number as the sub-channel number. When using an authorized CableCARD, the
channel numbers are determined by the cable company.

Inputs

Antenna/Cable input: Qty 2

F connector, 75-ohm

HDMI (digital video/audio): Qty. 2
Signal Type

HDMI standard connector
HDMI standards for digital PCM audio and video (80i, 80p, 720p, 1080i).
Not intended for use with computer-specific resolutions.

Video/S-Video: Qty. 3 each

Signal Type

Video: RCA Pin Plug, 1.0 Vp-p, 75 ohm
S-Video: Four Pin Din Plug
Y: 1.0 Vp-p 75 ohm
C: 0.286 Vp-p (burst signal), 75 ohm
NTSC 80i only

Component Video (Y/Pr/Pb)
WD-52527, WD-62527: Qty. 2 sets
WD-52528, WD-62528: Qty. 3 sets

Signal Type

RCA Pin Plug (EIA-770.3 Standard Levels and Timing)
Y: 1.0 Vp-p (includes sync), 75 ohm
Pr: 700 mVp-p, 75 ohm
Pb: 700 mVp-p, 75 ohm
EIA-770.1 & EIA 770.2, 80i, 80p, EIA 770.3, 720p and 1080i

(video

standards)

Audio Inputs:
WD-52527, WD-62527: Qty. 7 pairs
WD-52528, WD-62528: Qty. 8 pairs

RCA Pin Plug 500 mV (full scale), 3 k ohm

Outputs

Video

Record Video: Qty. 1
Signal Type

Video: RCA Pin Plug 1.0 Vp-p, 75 ohm
NTSC 80i only

Audio
Audio Outputs
Audio Output: Qty. 1 pair
Record Audio Output: Qty. 1 pair

RCA Pin Plug, 500 mV rms + 200 mV (full scale) for analog sources.
1.5 V + 0.5 V (full scale) for digital sources.

From time to time, Mitsubishi may offer software updates to expand the features or operation of this TV. When these
updates are available they will be announced on our website site, Mitsubishi-tv.com. If you return your Owner’s
registration card, with your model and serial number, you may receive written notification of available software updates.

Advertising
This manual is related to the following products: