MITSUBISHI ELECTRIC WD-52527 - Manual (Page 48)

8
Chapter 3. NetCommand Setup and Editing
Connection for [Device] Screen
Figure 20
This screen allows the TV to learn the connection
between device(s) and input(s). Inputs 1-3, Components
1–3, HDMI 1 and 2, and/or the inputs for the A/V Receiver
all need to be checked, if connected. Add or remove
check marks to indicate what type of connections (Audio
or Video) are used with each TV and A/V Receiver input.
Figure 20. Connection for [Device] screen
Edit NetCommand®, Add Devices, continued
Name Screen
Figure 19
The Name screen allows you to change the default
name for each device to a custom name of up to eight
characters (including a blank space), selecting from
letters, numbers and nine different characters. Press
ADJUST or to select each letter, then press ENTER
to move to the next position. Press CANCEL on the
remote to delete the current letter and move back
one character position. When in the first position, the
CANCEL button will return the name to the default name.
[Device] Advanced Learn Screen
Figure 18
After learning the basic device keys, the [Device]
Advanced Learn screen allows you to learn any special
keys for your device. Most common IR remote control
signal formats can be learned by NetCommand.
A table of specialized device keys is shown in Appendix
E. You only need to learn the functions your devices
respond to and can ignore the functions that do not apply
to your device.
Figure 18. [Device] Advanced Learn screen
Figure 19. Name screen
Figure 17. [Device] Learn screen