Motorola SBG900 - Manual (Page 22)

16 SBG900 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
Precautions
Postpone SBG900 installation until there is no risk of thunderstorm or lightning activity in the area. SBG900.
•
To avoid potential shock, always unplug the power cord from the wall outlet or other power source before
disconnecting it from the SBG900 rear panel.
•
To prevent overheating the SBG900, do not block the ventilation holes on the sides of the unit.
• Do not open the unit. Refer all service to your cable service provider.
• Wipe the unit with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners
directly on the unit or use forced air to remove dust.
Signing Up for Service
You must sign up with a cable service provider to access the Internet and other online services.
To activate your service, call your local cable service provider.
You need to provide the MAC address marked HFC MAC ID printed on the Label on the Bottom of the SBG900 . If
you printed this document, you can record it here:
00 : ______ : ______ : ______ : ______ : ______
You should ask your cable service provider the following questions:
•
Do you have any special system requirements?
•
When can I begin to use my SBG900?
• Are there any files I need to download after I am connected?
• Do I need a user name or password to access the Internet or use e-mail?
To avoid damaging the SBG900 or computers with static electricity:
Always make the wall
connection first. Before you connect or
disconnect the USB or
Ethernet cables,
always
touch the coaxial cable
connector on the
SBG900.