Setting up a usb driver in windowsme, Setting up a usb driver in windows me – Motorola SBG900 User Manual
Page 92
86
SBG900 User Guide
X
Exit
Overview Installation Troubleshooting
Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
Setting Up a USB Driver in Windows Me
1
Insert the Motorola SURFboard Wireless Cable Modem Gateway CD-ROM in the CD-ROM drive.
This CD
contains the USB drivers and must be inserted and read by the PC
before you connect the SBG900 to the
PC.
2
Connect the USB cable as shown in
.
A few seconds after you complete the USB connection, the Add New Hardware Wizard window is displayed:
3
Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is
successful, the following window is displayed:
4
If the window above is displayed, click Finish. Otherwise, be sure the
Motorola SURFboard Wireless Cable
Modem Gateway
CD-ROM is correctly inserted in the CD-ROM drive.
When you finish setting up the USB driver, you can continue with “
Although your SBG model number may be different than in the images in this guide,
the procedure is the same.