Motorola SBG900 - Manual (Page 52)

46 SBG900 User Guide
Home
X
Exit Print
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless USB
Gateway > PORT TRIGGERS — predefined Page
When you run a PC application that accesses the Internet, it communicates with a computer on the Internet. In
some applications, especially gaming, the computer on the Internet also communicates with your PC. Because
NAT does not normally allow these incoming connections, the SBG900 supports port triggering.
The SBG900 is preconfigured with port triggering for common applications. You can also configure additional port
triggers if needed. Configuring port triggers for an application requires:
•
The application transport protocol — TCP or UDP
•
The application port number
You can use the default values for the remaining parameters.
Only one PC at a time connected to the SBG900 can use an application requiring port triggering. Use this page to
view predefined port triggers: