Majestic Appliances LDVR1 - Manual (Page 25)

25
LDVR Series Direct Vent Gas Fireplace
10007317
36LDVR
1. Place rear log (B158) on rear
bracket (ensure log is seated prop-
erly to the bracket and located to
the two pins), so it will not move
from side to side and is firmly posi-
tioned on the bracket.
2. Place front left log (B160). Use the
log’s bottom hole to locate it onto
the front support and just rest on
top of the rear log.
3. Place front right log (B159). Use
the log’s bottom hole to locate it
onto the front support and the top
hole to the knob onto the rear log.
4. Place front center log (B161) on
top of the two small shelves at the
front log support and between the
left and right logs.
5. Place ember material on top of
burner. Scatter the ember mate-
rial over the tiles on the front area
of the burner housing. (Fig. 49)
Do not pack the ember material.
Separate it when unpacked and keep it in a fluffy and
loose condition for a more realistic ember effect.
6. Scatter the lava rock material around the firebox
base. �����
����������
����
Rear
(B158)
Front Left
(B160) Front Center
(B161 )
Front Right
(B159)
LG481
Fig. 42 Correct log placement for 36LDVR.
39LDVR
1. Place rear log (BC14) on rear bracket
(ensure log is centered and seated
properly to the log support).
2. Place front left log (BC15). Use log’s
bottom hole to locate it onto the front
support and just rest on top of the rear
log.
3. Place front right log (BC16). Use log’s
bottom hole to locate it onto the front
support and the top hole to the knob
on the rear log.
4. Place front center log (B138) on top of
the two small shelves at the front log
support, and between the left and right
logs.
5. Place ember material on top of burner.
Scatter the ember material over the
tiles on the front area of the burner
housing. (Fig. 50) Separate it when un-
packed and keep it in a fluffy and loose
condition for a more realistic ember
effect.
�����
����������
����
Front Left
(BC15)
Front Right
(BC16)
Rear
(BC14)
Front Center
(B138)
LG414
Fig. 43 Correct log placement for 39LDVR.
Do not place any of the lava rock mate-
rial on the burner housing assembly.
Do not place any of the lava rock material
on the burner housing assembly.