Philips Magnavox MVR630MG - Manual (Page 15)

2 Press the PLAY/o button or the STOP/p button to
select SET CLOCK, then press the F.FWD/B button.
CH
3 2 1
6 5 4
9 8 7
0
POWER
STATUS/EXIT
MEMORY SLOW REC/OTR
SPEED TIME SEARCH STILL/PAUSE
VCR/TV EJECT
MENU CLEAR
REW
PLAY
STOP
F.FWD
TIME 02 :15 PM
MONTH – – / – – / – –
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
Setting the Clock 15
Follow the steps below to set your VCR’s clock. Make sure:
● The VCR is on and the VCR/TV light appears on the display
panel. (If it does not, press the VCR/TV button once.)
● You make each entry within 60 seconds of the previous entry.
4 Press two Number buttons for the hour(s) and two
Number buttons for the minute(s).Then press 1 for
AM or 2 for PM. For example, for 2:15 PM, press 02, 15, 2.
5 Press two Number buttons for the month, two
Number buttons for the day, and two Number but-
tons for the year. For example, for July 1, 2002, press 07,
01, 02. The day of the week will appear automatically.
TIME 02 :15 PM
DATE 07 / 01 / 02
MON.
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
6 Press the STATUS/EXIT button.
• Enter a 0 before a single-digit number.
• Entries that do not match the VCR’s
clock or calendar will cause a question
mark to appear on the screen.
• To make corrections, press the CLEAR
button until the space for the number
you want to correct is flashing. Then
enter the correct number.
• To see the current time on the TV
screen, press the STATUS/EXIT button.
Details are on page 20.
• The VCR may lose the clock setting if
the power fails.
Helpful Hints
1 Press the MENU button.
3 Press the PLAY/o button or the STOP/p button to
select SET CLOCK again, then press the F.FWD/B
button.
TIME – – :– –
DATE – – / – – / – –
TO END PUSH EXIT
SET CLOCK
→ SET CLOCK
DAYLIGHT SVG TIME [ON]
SELECT op CHOOSE B
TO END PUSH EXIT
2-3
1
6
4-5
mvr630mg.QX33 2/11/02 12:05 PM Page 15