Philips Magnavox MVR630MG - Manual (Page 34)

CH
3 2 1
6 5 4
9 8 7
0
POWER
STATUS/EXIT
MEMORY SLOW REC/OTR
SPEED TIME SEARCH STILL/PAUSE
VCR/TV EJECT
MENU
CLEAR
REW
PLAY
STOP
F.FWD
• The MEMORY button does not
function if REPEAT PLAY is ON.
Details are on page 33.
• To erase a real-time counter memo-
ry, press the MEMORY button until
the M disappears from the screen.
• You may only set the real-time
counter to zero at one location at a
time. Setting the real-time counter
to zero at a second location will
erase the previous real-time counter
to zero setting.
Helpful Hints
STOP 1:08PM
TV STEREO CH10
SLP 1 : 23 : 45 HIFI
Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
1 Play, fast forward, or rewind a tape to the location
that you would like to refer to later. Press the
STOP/p button to stop the tape.
2 Press the STATUS/EXIT button to see the status
display.
3 While the status display is on the screen, press the
CLEAR button to reset the real-time counter to
zero.
STOP 1:08 PM
TV STEREO CH10
SLP 0 : 00 : 00 HIFI
4 While the real-time counter is on the screen, press
the MEMORY button so that M appears beside the
counter.
STOP 1:08 PM
TV STEREO CH10
SLP M 0 : 00 : 00 HIFI
5 To go to a tape location where the real-time counter
was reset to zero, press the REW(ind)/{ button or
the F.FWD/B button when playback is stopped.
When the tape reaches the point at which the counter was
set to zero, the tape will stop.
Press the PLAY/o button to watch the tape.
34 Real-Time Counter Memory
5
1
4
2
3
MVR630MG only
MVR630MG only
MVR630MG only
mvr630mg.QX33 2/11/02 12:05 PM Page 34