Philips Magnavox MVR630MG - Manual (Page 23)

AUDIO IN Jacks
Connect the audio cables coming from the
AUDIO OUT Jacks of a camcorder, another VCR,
or an audio source here. Details are on page 32.
The MVR630MG is shown here. The MVR430MG has
only one AUDIO IN jack.
VIDEO IN Jack
Connect a video cable coming
from the VIDEO OUT Jack of a
camcorder, another VCR, or an
audio-visual source (laser disc
player, digital video disc player,
etc.) here. Details are on page 32.
ANT(enna) IN Jack
Connect your antenna or cable
here. Details are on pages 6-10.
CH3/CH4 Switch
Set to channel 3 or 4
to use your TV with
your VCR. Details are
on pages 6-9.
OUT Jack
Use the supplied RF coaxi-
al cable to connect this
jack to the ANTENNA IN
Jack on your TV, Cable
Box, or Direct Broadcast
System. Details are on
pages 6-9.
VIDEO OUT Jack
Connect a video cable going to the VIDEO
IN Jack of a TV, camcorder, another VCR,
or an audio-visual system (monitor, laser disc
player, digital video disc player, etc.) here.
Details are on pages 10, 32, and 38.
AC Power Cord
Connect to a stan-
dard AC outlet to
supply power to the
VCR.
AUDIO OUT Jacks
Connect the audio cables going to the AUDIO IN Jacks
of a TV, camcorder, another VCR, or an audio system
here. Details are on pages 10, 32, and 38.
The MVR630MG is shown here. The MVR430MG has only
one AUDIO OUT jack.
ANT AUDIO
VIDEO
IN
OUT
OUT IN CH3 CH4
OUT
L
R
IN
Rear Panel 23
MVR630MG
mvr630mg.QX33 2/11/02 12:05 PM Page 23