Motorola 6816101H01-A User Manual
Page 25
Radio Reassembly
— Detailed
2-9
7.2
Chassis and Front Cover Reassembly
NOTE
Proceed to perform steps 1, 2, 3 and 4 only if there is a need to replace the speaker,
speaker bracket or speaker felt.
1.
Place the speaker felt onto the grille area (see
“Figure 2-8”) .
2.
Place the speaker on top of the felt.
Figure 2-8
3.
Stick the speaker poron pad onto the back of speaker magnet.
4.
Place the speaker bracket and screw the bracket to the housing.
NOTE
Proceed to perform steps 5, 6, 7 and 8 only if there is a need to replace the latch.
5.
Slot the battery latch shaft into the latch (see
“Figure 2-9”).
Figure 2-9
6.
Place the latch onto the housing, with the shaft protruding on the right side of the latch (see
“Figure 2-10”).