Motorola 6816101H01-A User Manual

Page 6

Advertising
background image

iv

Exposure awareness can be facilitated by the use of a product label directing users to specific user
awareness information. Your Motorola two-way radio has a RF exposure product label. Also, your
Motorola user manual, or separate safety booklet includes information and operating instructions
required to control your RF exposure and to satisfy compliance requirements.

Compliance with RF Exposure Standards

Your Motorola two-way radio is designed and tested to comply with a number of national and
International standards and guidelines (listed below) for human exposure to radio frequency
electromagnetic energy. This radio complies with the IEEE (FCC) and ICNIRP exposure limits for
occupational/controlled RF exposure environments at operating duty factors of up to 50% talk-50%
listen and is authorized by the FCC for occupational use only.

In terms of measuring RF energy for compliance with these exposure guidelines, your radio
generates measurable RF energy only while it is transmitting (during talking), not when it is receiving
(listening) or in standby mode.

NOTE: The approved batteries, supplied with this radio, are rated for a 5-5-90 duty factor (5% talk-

5% listen-90% standby) even though this radio complies with FCC occupational exposure

limits and may operate at duty factors of up to 50% talk.

Your Motorola two-way radio complies with the following RF energy exposure standards and
guidelines:

• United States Federal Communications Commission, Code of Federal Regulations; 47CFR part

2 sub-part J

• American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers

(IEEE) C95. 1-1992

• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radiofrequency Elec-

tromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999

• Australian Communications Authority Radiocommunications (Electromagnetic Radiation -

Human Exposure) Standard, 2003

• ANATEL ANNEX to Resolution No. 303 of July 2, 2002 "Regulation of limitation of exposure to

electrical, magnetic and electromagnetic fields in the radio frequency range between 9 KHz and

300 GHz" and "Attachment to resolution # 303 from July 2, 2002"
"Additional Requirements for SMR, Cellular and PCS Product Certification"

RF Exposure Compliance and Control Guidelines and Operating
Instructions

To control your exposure and ensure compliance with the occupational/controlled environment
exposure limits, always adhere to the following procedures.

Guidelines:

• Do not remove the RF Exposure Label from the device.
• User awareness instructions should accompany device when transferred to other users.
• Do not use this device if the operational requirements described herein are not met.

Advertising