Motorola 6816101H01-A - Manual (Page 60)

G-2
Term Definition
ROM Read Only Memory.
Scan List The Scan List determines which channels the radio scans, when operating in
the Scan Mode, on the current channel.
Scan List Member The Scan List allows you to select the grouping of channels that make up the
current Scan List Member channels. This grouping of Scan List Member channels
can then be scanned for transmission activity - one at a time, when the radio is in
Scan Mode. A Scan List can have a maximum of 16 Scan List
Members. Scan List Member scanning priority is definable.
Scan Mode When the radio is in one of the two Scan States: Active Scan and Landed Scan.
This mode is initiated when the programmable SCAN button is pressed.
Serial Number Each radio has its own unique serial number. This information is stored in the
radio
‟s codeplug.
Software Computer programs, procedures, rules, documentation, and data pertaining to
the operation of a system.
Squelch Muting of audio circuits when received signal levels fall below a pre-determined
value.
Tone Private Line Transmitted when the receiving radio is to only receive calls from radios with
(TPL) specific TPL codes, this creates communications groups while operating in
Conventional Dispatch mode. TPL allows for more use and privacy on a fre-
quency. TPL is transmitted at a sub-audible (not able to be heard) frequency.
Also known as CTCSS.
Tx Frequency A designated frequency used when transmitting carrier for the current channel.
µC Microcontroller.
UHF Ultra High Frequency.
VHF Very High Frequency.