Marmitek 20041 - Manual (Page 11)

7.1. Infrared extender
Your CableLink 75 system has a build in infrared extender. This infrared extender lets you
control your VCR, DVD player and Satellite receiver, which are set up at the transmitter side,
through walls and floors.
To use the infrared extender, point your remote at the infrared receiver which is located
behind the window at the front of the CableLink 75 receiver. The infrared extender will also
work with the original remotes of your equipment (except 400kHz infrared systems like B&O).
To use the infrared extender you must have the infrared extension cable connected to the
CableLink 75 transmitter. Please see 5.2 for more details.
7.2. Button descriptions
LED indicator light
The indicator light flashes when the remote is operating
POWER
Switches your equipment ON and OFF
TV, VCR, DVD, SAT
Used to select the device to control
SET UP
Used for programming the remote
CHAN + and CHAN -
To select channels
VOL +/-
To control the volume
M
Mute key. To switch off the sound
0-9
To select channels and numbers. Also to enter device codes.
ENTER
Works as acceptance button for menu functions of your
equipment
A/V
Toggles between TV and Video mode
MENU
Access the menu function of the device you are controlling (if
available)
EXIT
Used to exit menu functions
Cursor keys
Used to navigate and adjust Menu items of the device you are
controlling
OK
Select menu items of the device you are controlling
11 CABLELINK ඀