Read this first, The cablelink 75 system – Marmitek 20041 User Manual

Page 3

Advertising
background image

1. READ THIS FIRST !

Caution: to reduce risk of electric shock, do not disassemble any part of the videosender
system. No user-serviceable parts are inside. If you spill liquid on it, disconnect the unit from
the AC outlet to prevent possible fire or shock hazard and consult authorized service
personnel.
Use only the supplied powersupplies. Defective parts must be replaced by original spareparts
only.

Powerline operated equipment or accessories connected to the unit should bear the CE
certification mark and should not be modified in any way that might defeat the safety
features.
Your CableLink meets all European standards for EMC, Safety and Radio Frequency, however
inteference from other RF transmitters may occur. The range of the CableLink is at least 30
meters in an open air situation, however indoor the range is highly influenced by construction
materials applied within the house.

Warning: to prevent electric shock hazard, do not expose any part of the CableLink to rain or
moisture. Do not use near a bath tub, swimmingpool, etc. Disconnect the unit during
thunderstorms from mains, areal socket and other connected equipment to avoid damage.

No guarantee or liability will be accepted for any damage caused due to incorrect use of the
equipment supplied, other than indicated in this owner’s manual.

2. The CableLink 75 system.

The CableLink system includes a transmitter and a reciever for antenna signals.
With the CableLink 75 system you can transmit audio and video signals throughout your
house to a remote TV or VCR, without additional coaxial cables.
The CableLink Transmitter can be connected directly to your antenna wall socket. The
Transmitter is equiped with a built in TV Tuner. This tuner can be programmed and operated
remotely with the Remote Control supplied. This tuner converts the antenna signal into an
audio/video signal. This A/V signal is transmitted by the unit on a 2,4 GHz frequency. The
receiver is connected to your remote Television or VCR on the Scart input.

Multisource.
Additional other video equipment can be connected to the transmitter as well (e.g. VCR, DVD
player or satellite receiver) .
The source required can be selected by the Remote Control supplied, even from another
room.
The CableLink has a built in IR (infrared) extender to be used with your original remotes
You can also use the supplied 5in1 universal remote both locally (for your connected TV) as
well as the for various equipment (e.g. DVD, VCR.etc.). connected to the Transmitter. This
supplied remote is also used to select channels on the CableLink.

3

CABLELINK

Advertising
This manual is related to the following products: