Marmitek 20041 User Manual
Page 7
5.2 Installation of the transmitter with extra equipment (such as satellite
receiver, VCR or DVD player).
This hook up scheme allows you to watch all sources both in the main room and the second
room.
1.
Connect the antenna splitter [A] to the aerial connection of your TV
2.
Connect the supplied coaxial cable [C] to one side of the antenna splitter [A]
3.
Connect the other end of the coaxial cable [C] to the antenna input [3] of the CableLink
75 transmitter
4.
Connect the existing coaxial cable (from your Satellite receiver or VCR) to the other end
of the splitter.
5.
Connect the audio/video output [F] from your DVD player to the audio/video input [4] of
the CableLink 75 transmitter [MultiSource function]. A RCA/RCA cable [G] is supplied.
6.
Connect the audio/video output [5] of the CableLink 75 transmitter to the audio/video
input (SCART) [I] of your TV. To make this connection, you can use the cable you used for
connecting your DVD to your TV originally.
7.
Insert the plug of the infrared extender cable to output [2] on the CableLink 75
transmitter.
8.
Locate the small IR LED’s on the IR sensors of the equipment connected. The IR emitters
have an adhesive tape on the back side. Remove the paper protective label and affix the
emitter lightly on the facia of your equipment. It may take some adjustments to find the
right location.
9.
Select a channel with the Channel Selector [9].
10. Connect the power supply [6]
11. Switch on the unit with the ON/OFF switch [7].
12. Make sure the CableLink 75 transmitter is placed some distance away from other items.
Do not place the transmitter on top of your audio and/or video equipment. Direct the flat
2,4 GHz antenna [K] in the direction of the Receiver.
5.3 Installation of the Receiver.
Attention: Because of technical reasons, you need to place the CableLink
transmitter and receiver together when installing the system. After finishing
the installation you can move the receiver to wherever you wish to connect
your TV. During the installation the receiver needs to be connected to a
(random) TV.
1.
Connect the RCA cable with the A/V output on the CableLink receiver [2]. Take care to
match the color of the plugs with the color code on the jacks of the receiver.
2.
Connect the cable with your television set, use the Scart adaptor marked "Receiver" if
connected on the scart input.
3.
Select the corresponding channel [3] with your transmitter (set both units on e.g. "C").
4.
Connect the powersupply [4]
5.
Switch on the unit with the ON/OFF switch [5].
6.
Direct the flat 2,4 GHz antenna [K] in the direction of the Transmitter.
7
CABLELINK