MITSUBISHI ELECTRIC 838 SERIES - Manual (Page 56)

56 4. TV Menus
For assistance call 1(800) 332-2119
Setup Language
Menu English
Spanish Displays on-screen menus in either English or Spanish.
Antenna
Digital
Audio
Selects the current language for a digital program from the ANT input. Each digital program may
include up to seven language choices or there may be no language choice offered.
Setup Clock
Set the TV clock to:
• Use the TV Timer to power on the TV automatically at a preset time
• Receive correct updates to ChannelView listings
Note: When the Daylight Saving Time change occurs, you must open this menu and set the TV’s clock ahead or back.
Time Highlight the Clock icon and press ENTER or to highlight the time. To edit time and date:
• Press ENTER to select the item to change.
• Press to change values.
• Press to move to another column.
Date
Time
Zone
Eastern, Central, Mountain, Pacific, etc. The correct time zone is required for accurate ChannelView
updates.
Daylight
Savings
Off, On Select the setting for your area (required for accurate ChannelView updates).
Setup Timer
The Timer tells the TV to power on automatically at a time you set. Use this menu to set a day,
time, input, and channel for the Timer. If the TV is already on at the set time, the TV will automati-
cally change to the designated channel or input.
• The TV clock must be set before you can use the Timer feature.
• As a reminder that the TV Timer is set, the TV
POWER indicator flashes slowly while the TV is powered off.
• When the Timer turns on the TV, press any key on the remote control to keep it from turning off after five minutes.
Timer On, Off Select On to enable the Timer.
Day Daily, Mon-Fri, (every) Sunday, (every) Monday,
(every)
Tuesday, etc.
Select the day or days of the week for the Timer to
turn on the TV.
Time To set the time for the TV to come on:
1. Highlighted the time and press ENTER.
2. Press to change values. Press ENTER to confirm entries.
Device Ant, DVD, VCR, etc.
Select the input you want displayed when the TV comes on. Choose from the defined and enabled
inputs that appear in the
Input Selection menu.
Channel If the source is the ANT input, press to select a channel number or press and hold to scroll quickly.
Setup