MITSUBISHI ELECTRIC 838 SERIES - Manual (Page 86)

86 Appendices
For assistance call 1(800) 332-2119
HDMI Control of an HDMI A/V
Receiver and Connected Devices
Note: Connect the A/V receiver to the TV with an
HDMI cable before making other connections.
1. Enable HDMI Control for the A/V receiver as
described in “Enabling HDMI Control of CEC
Devices” on the previous page.
2.
Power on the HDMI device you wish to connect to
the A/V receiver (such as a disc player, cable box,
or satellite receiver). Allow the device to complete
the power-on sequence (boot up). Stop playback if
the device starts playing.
3. Connect the device to the A/V receiver with an
HDMI cable.
4. Select the device’s HDMI input on the A/V receiv-
er’s front panel controls or remote control.
5. When the TV detects the connection, the New
Device Found screen will appear.
Note: If the TV is unable to detect the device, either
the device’s CEC capability is not enabled or
the device is not CEC compatible. Enable
HDMI control through the device’s menus
before continuing. You may need to temporar-
ily connect the device directly to the TV to view
device menus.
6. Highlight On and
press ENTER to
add a check.
7. Highlight EXIT and press ENTER to close the New
Device Found screen.
8. Optional: Connect the TV’s DIGITAL AUDIO
OUTPUT to an input on the A/V receiver. Use this
additional connection if:
• You want the ability to switch between the A/V
receiver speakers and the TV speakers.
• You want to use the A/V receiver to listen to
devices connected to the TV only, e.g., an
antenna input or camcorder.
9. 838 Series. If desired, perform NetCommand IR
Learning to supplement CEC functions. You must
first connect and place IR emitters for the devices.
See page 64.
Pb Pr
INPUT 2
INPUT 1
DIGITAL
AUDIO OUTPUT
(480i / 480p / 720p / 1080i)
Y/ VIDEO
Pb Pr Y/ VIDEO
DVI/PC L R INPUT AUDIO
3D
GLASSES
EMITTER
ANT
AUDIO L R
LAN
AUDIO OUTPUT L R
DIGITAL
AUDIO OUTPUT
1 2 3
HDMI
HDMI cable
DIGITAL
AUDIO
OUTPUT
HDMI OUT DIGITAL
AUDIO IN
High-definition
DVD player
DVD player
Cable box
VCR
Y/ VIDEO
TV
A/V receiver with
HDMI output
Any connection
types
Optional
analog or
digital audio
connection
Connecting HDMI devices. The optional digital audio
connection allows you to hear audio through the A/V
receiver from devices connected to the TV only.
Appendix C: HDMI Control of CEC Devices, continued