Antenna connections – Memorex MVUC821 User Manual

Page 12

Advertising
background image

11

ANTENNA CONNECTIONS

OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT INCLUDED)

Follow the instructions for the type of antenna system you intend to use.

Combination VHF/UHF

Antenna (Single 75 ohm cable

or 300 ohm twin-lead wire)

Separate VHF/UHF Antennas

Combination VHF/UHF

Antenna (Separate VHF and

UHF 300 ohm twin-leads)

Connect the UHF twin-lead wire to a

combiner (NOT SUPPLIED). Connect

the VHF twin-lead to a 300-75 ohm

matching transformer (NOT SUPPLIED).

Attach the transformer to the combiner.

Attach the combiner to the antenna jack.

Connect the 75 ohm cable from the VHF

antenna and the UHF antenna twin-lead

wire to a combiner (NOT SUPPLIED).

Attach the combiner to the antenna jack.

NOTE: If your VHF antenna has a twin-

lead wire, use a 300-75 ohm matching

transformer,

then

connect

the

transformer to the combiner.

Connect the 75 ohm cable from

combination VHF/UHF antenna to the

antenna jack.

OR

If your combination antenna has a 300

ohm twin-lead wire, use a 300-75 ohm

matching transformer (NOT SUPPLIED).

AM ANTENNA:

Connect the black AM Loop Antenna wire to the black AM Antenna terminal and the white AM Loop Antenna wire to the white

AM Antenna terminal.

FM ANTENNA:

For best FM reception, extend the FM Wire Antenna to its full length

NOTES:

To improve the AM signal, move the AM Loop Antenna away from the system, AC Adaptor and other equipment.

To improve FM signal, extend FM antenna fully and keep the FM antenna as horizontal as possible after connection.

Extend the AM Loop Antenna

wire.

1

Connect

the

AM Loop

Antenna’s black wire to the

black terminal and the white

wire to the white terminal at the

rear of the main unit. Make sure

the wires are inserted correctly

into the terminals as shown.

2

At the bottom of the AM

Loop Antenna, rotate the

stand to the rear and

then push the stand to

the front.

3

Insert the tabs into the gaps in

the stand. Remember to fully

extend the AM Loop Antenna

wire and locate it away from the

main unit, AC adaptor and other

equipment for better reception

and to prevent interference.

1

Advertising