Memorex MVUC821 User Manual
Page 19
18
RADIO OPERATION (CONTINUED)
Press the Power button to turn the unit on; the STANDBY
indicator will turn off.
1
Press the TUNER/BAND button on the remote control to
select the Radio mode. Select a radio station as described
on the previous page.
NOTE: You can also press the SOURCE button on the main
unit until the display shows an AM or FM reception to select
the Radio mode.
2
SETTING AND RECALLING RADIO PRESETS
Press the PROGRAM button; STORE 1 will appear in
the display.
3
TO RECALL PRESETS:
While in Radio mode (AM/FM): To recall a radio preset,
press the Channel Up/Skip (n) button 1 to increase and/or
the Channel Down/Skip (o) button 2 to decrease the Radio
Preset number.
2
1
5
Select the desired preset using the Navigation π 1 and/or
† 2
button, then press the PROGRAM button 3 again to
confirm; STORED will appear in the display. Repeat steps 2
through 4 to set more presets (up to 20 each band).
2
3
1
4