Motorola SL7550 - Manual (Page 53)

Advanced Features
English
39
3 ^
or
v
to select Set Active List and press
c
to
select.
4 ^
or
v
to required list and press
c
to select.
NOTE: The list selected will be your active scan list.
Starting and Stopping Scan
Procedure:
Press the programmed Scan button to start or stop Scan.
OR
Follow the procedure below.
1 c
to access the menu.
2 ^
or
v
to Scan and press
c
to select.
3 ^
or
v
to Scan State and press
c
to select.
4 ^
or
v
to required scan state and press c to select.
5 The display shows Scan On when scan is enabled. The LED
blinks yellow and the scan icon appears.
OR
The display shows Scan Off when scan is disabled. The
LED turns off and the scan icon disappears.
While scanning, the radio will only accept data (e.g. text
message, location, or PC data) if received on its Selected
Channel.
Responding to a Transmission During a Scan
During scanning, your radio stops on a channel where activity
(e.g. a group call) targeted for the radio is detected. Your radio
unmutes and the incoming call sounds through the radio's
speaker.
The radio remains on that channel while the activity is present
and for a programmed time period (known as "hang time") after
the activity ceases.
Procedure:
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is free for
you to respond.
2 Press the PTT button during hang time. The LED lights up
solid green.
3 Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.
4 Release the PTT button to listen.
5 If you do not respond within the hang time, the radio returns
to scanning other channels/groups.


NAG-LACR.book Page 39 Wednesday, May 2, 2012 2:47 PM