Advanced features – Motorola SL7550 User Manual

Page 69

Advertising
background image

Advanced Features

English

55

If your radio has Emergency Cycle Mode enabled, repetitions of
hot mic and receiving period are made for a programmed
duration.

NOTE: During Emergency Cycle Mode, received calls sound

through the radio’s speaker.

If you press the PTT button during the programmed receiving
period, you will hear a prohibit tone, indicating that you should
release the PTT button. The radio ignores the PTT press and
remains in Emergency mode.

NOTE: If you press the PTT button during hot mic, and

continue to press it after the hot mic duration expires,
the radio continues to transmit until you release the
PTT button.

Procedure:

1

Press the programmed Emergency On button.

2

The display shows Tx Alarm and the destination alias. The
LED lights up solid green and the Emergency icon appears.

3

Once the display shows Alarm Sent, speak clearly into the
microphone. When hot mic has been enabled, the radio
automatically transmits without a PTT press until the hot mic
duration expires.
While transmitting, the LED lights up solid green and the
Emergency icon appears.

4

The radio automatically stops transmitting when:
Once the cycling duration between hot mic and receiving
calls expires, if Emergency Cycle Mode is enabled.

OR
Once the hot mic duration expires, if Emergency Cycle
Mode is disabled.

5

To transmit again, press the PTT button.
OR
Press the programmed Emergency Off button to exit the
Emergency mode.

6

The radio returns to the Home screen.

If your radio is set to Silent, it will not display any audio or
visual indicators during Emergency mode, or allow any
received calls to sound through the radio’s speaker, until the
programmed hot mic transmission period is over, and you
press the PTT button.
If your radio is set to Silent with Voice, it will not display any
audio or visual indicators during Emergency mode when you
are making the call with hot mic, but allow sound through the
radio’s speaker when the target radio responds after the
programmed hot mic transmission period is over. The
indicators will only appear when you press the PTT button.
NOTE: If the Emergency Alarm request fails, the radio does

not retry to send the request, and enters the hot mic
state directly.

NAG-LACR.book Page 55 Wednesday, May 2, 2012 2:47 PM

Advertising