Motorola SL7550 - Manual (Page 86)

Advanced Features
English
72
Stopping an Automatic Site Search
When the radio is actively searching for a new site:
Procedure:
Press the programmed Site Lock On/Off button.
1 A tone sounds and the display shows Site Locked.
2 The LED turns off and the display shows the channel alias.
OR
Procedure:
Use the menu.
1 c
to access the menu.
2 ^
or
v
to Utilities and press
c
to select.
3 ^
or
v
to Radio Settings and press
c
to select.
4 ^
or
v
to Site Roaming and press
c
to select.
5 ^
or
v
to Lock Site State.
6 Press
c
to lock site. The display shows 9 beside Enabled.
OR
Press
c
to unlock site. The 9 disappears from beside
Enabled. The LED turns off and the radio returns to the
Home screen. The display shows the channel alias.
NOTE: At Step 5, you can also use
<
or
>
to change the
selected option.
Starting a Manual Site Search
Procedure:
Press the programmed Manual Site Roam button and proceed
to Step 6.
OR
Follow the procedure below.
1 c
to access the menu.
2 ^
or
v
to Utilities and press
c
to select.
3 ^
or
v
to Radio Settings and press
c
to select.
4 ^
or
v
to Site Roaming and press
c
to select.
5 ^
or
v
to Active Search and press
c
to select.
6 A tone sounds and the display shows Finding Site.
The LED blinks green.
7 If a new site is found, a tone sounds and the LED turns off.
The display shows Site <Alias> Found.
OR
If there is no available site within range, a tone sounds and
the LED turns off. The display shows Out of Range.
OR
If a new site is within range, but the radio is unable to
NAG-LACR.book Page 72 Wednesday, May 2, 2012 2:47 PM