Maretron SSC200 - Manual (Page 10)

SSC200 User’s Manual
Page 6 Revision 1.8
NMEA 2000 / Power
Connector
NMEA 0183 Connector
Figure 3 – NMEA 2000
®
/ NMEA 0183 Interface Connector Locations
2.4.1 Connecting to NMEA 2000
®
Interface
The Maretron SSC200 provides a connection to an NMEA 2000
®
interface through a five pin
male connector (Figure 4). You connect the SSC200 to an NMEA 2000
®
network using a
Maretron NMEA 2000
®
cable (or compatible cable) by connecting the female end of the cable
to the SSC200 (note the key on the male connector and keyway on the female connector) as
shown in Figure 5 below.. Be sure the cable is connected securely and that the collar on the
cable connector is tightened firmly. Connect the other end of the cable (male) to the NMEA
2000
®
network in the same manner. The SSC200 is designed such that you can plug or unplug
it from an NMEA 2000
®
network while the power to the network is connected or disconnected.
Please follow recommended practices for installing NMEA 2000
®
network products.
Figure 4 – NMEA 2000
®
/Power Connector Face Views