Maretron SSC200 - Manual (Page 11)

® ®
Figure 5 - SSC200 with NMEA 2000
®
Connection Only
2.4.2 Connecting to NMEA 0183 Interface
The Maretron SSC200 provides a connection to an NMEA 0183 interface through an eight pin
male connector (Figure 6). You connect the SSC200 to an NMEA 0183 network using the
Maretron supplied 10 meter cable by connecting the female end of the cable to the SSC200
(note the key on the male connector and keyway on the female connector). Be sure the cable
is connected securely and that the collar on the cable connector is tightened firmly.
Revision 1.8 Page 7