Motorola 3460 Fast'R - Manual (Page 70)

3460 Fast’R
C-6
Action Commands
+FDR Data Receive
Initiates a transition to Phase C data reception. Phase A,
B, and C results shown in Table 2-3.
+FDT Data Transmit
Transmits a Phase C page.
+FIP Default
Resets Services Class 2.0 parameters to default values.
+FKS Terminate Session
Sends DCN at next opportunity and hangs up.
Configuration Commands
+FCC= Allows DTE to sense and set the capabilities of the fax
modem. Sets values used to generate DIS (sends
capabilities to remote modem).
VR, BR,
WD, LN,
DF, EC,
BF, ST See Table 2-8
+FCR=n Receive Fax Data
Specifies whether the computer can receive fax data.
0 No
1 Yes
+FIS= Allows DTE to sense and set the fax capabilities for
current session. DCE copies +FCC into +FIS (generates
DIS, DTC, or DCS).
VR, BR,
WD, LN,
DF, EC,
BF, ST See Table 2-8
Table 2-2. Fax Class 2.0 AT Command Set (continued)
Command Option Description
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.