Motorola 3460 Fast'R - Manual (Page 78)

3460 Fast’R
C-14
NO DIALTONE 6
BUSY 7
NO ANSWER 8
Fax Class 2.0 Responses
+FCI - Remote CSI (Called Station ID) string.
+FCO - Connection with Group 3 facsimile station established
+FCS - DCS frame information. Negotiated T.30 parameters for
session. Syntax: VR, BR, WD, LN, DF, EC, BF, ST. See Table 2-8.
+FDM - Transition to Data Modem
+FET - Post page message from transmitting station. Message codes
are listed in Table 2-6.
+FHR - HDLC data (T.30 Phase B and Phase D HDLC control frames)
received by the DCE.
+FHS - Call termination status. Status codes are listed in Table 2-5.
+FHT - HDLC data (T.30 Phase B and Phase D HDLC control frames)
transmitted by the DCE.
+FIS - DIS frame information (identifies remote station capabilities)
+FNC - Non-Standard Command negotiation frame.
+FNF - Non-Standard Facilities negotiation frame.
NSF FIF Frame octets. DLC flags and zero bits inserted for
transparency are removed. Frame octets are reported in the order
received. Syntax: NSF FIF (hex).
+FNS - Non-Standard Set-up negotiation frame.
Up to 90 hexadecimal octets, separated by spaces. Syntax: hex-coded
octet string.
+FPO - Remote station has document to poll (polling request).
+FPI - Remote CIG (Polling Station ID) string. Syntax: VR, BR, WD,
LN, DF, EC, BF, ST. See Table 2-8.
+FPS - T.30 phase C page reception status; includes post page response
to +FDR command. See Table 2-7.
+FTC - DTC frame information (identifies remote station intention:
request for polling, transmit command). Syntax: VR, BR, WD, LN, DF,
EC, BF, ST. See Table 2-8.
+FTI - Remote TSI (Transmit Station ID) string. Syntax: TSI ID string
Remote TSI (Transmit Station ID) string, in reversed time sequence
from that in which it was received.
Table 2-3. Result Messages and Codes (continued)
Text Form
Numeric
Form