Motorola 3460 Fast'R - Manual (Page 81)

3460 Fast’R
C-17
25 DCS sent 3 times without response
26 DIS/DTC received 3 times; DCS not recognized
27 Failure to train at 2400 bps or +FMS value
28 “Response Received?” invalid response received
Transmit Phase C Hang-up Codes
40 Unspecified Transmit Phase C error
41 Unspecified image format error
42 Image conversion error
43 DTE to DCE data underflow
44 Unrecognized transparent data command
45 Image error, line length wrong
46 Image error, page length wrong
47 Image error, wrong compression code
Transmit Phase D Hang-up Codes
50 Unspecified Transmit Phase D error
51 “Response Received?” error
52 No response to MPS repeated 3 times
53 Invalid response to MPS
54 No response to EOP repeated 3 times
55 Invalid response to EOP
56 No response to EOM repeated 3 times
57 Invalid response to EOM
58 Unable to continue after PIN or PIP
Receive Phase B Hang-up Codes
70 Unspecified Receive Phase B error
71 “Response Received?” error
72 “Command Received?” error
73 T.30 T2 time-out, expected page not received
74 T.30 T1 time-out after EOM received
Receive Phase C Hang-up Codes
90 Unspecified Receive Phase C error
91 Missing EOL after 5 seconds
92 Bad CRC or frame (ECM mode)
93 DCE to DTE buffer overflow
Table 2-5. +FHS Command Responses: Hang-Up Status
Codes (continued)
Value Description