Tools, Alarm clock, Infrared port – MITSUBISHI ELECTRIC M342i User Manual
Page 18
18-
Tools
To calculate the conversion between the selected currencies:
Alarm clock
This feature allows you to set a daily Reminder Alarm.
To set a time and turn the alarm on:
If the phone is off at alarm time, it automatically switches on.
If the phone is locked or if the PIN setting is on, the phone returns to this locked state after the
alarm has rung until you use it.
If the alarm is acknowledged but not validated after the 3rd (and final) alarm, the alarm indica-
tors remain on the display for up to 15 minutes (the mobile then either goes back to its 'on' or
'off' previous state).
To use the alarm as a Reminder or a Snooze Alarm:
To turn the alarm off:
Infrared port
The infrared port allows you to exchange data between the mobile and other devices (provided
they have an infrared port).
You can for instance download or send files such as images for your Standby display (see "Pic-
tures", page 42 ), send or receive name cards,...
To initiate a transfer via the infrared port, your mobile must be facing another infrared port.
Both ports can then be opened and synchronised. The requested transfer can be performed.
Objects (e.g name cards) are transferred one by one.
2
Select
Currency converter
.
3
Select
Settings
.
4
Enter the first currency name (e.g. Euro). Press
OK
.
Enter the second currency name (e.g. Dollar). Press
OK
.
Enter the exchange rate using to enter a decimal point.
5
Press
OK
to validate the entry. Press
Save
to confirm data storage.
1
Press
OK
.
Select
Tools
.
2
Select
Currency converter
.
3
Select one of the first two options.
4
Enter the amount to be converted. Press to insert a decimal point if needed.
5
Press
OK
. The converted amount and the exchange rate information are displayed.
1
Press
OK
.
Select
Tools
.
2
Select
Alarm clock
.
3
Select
On
and enter the alarm time or press
OK
to validate the displayed time.
is displayed when reverting to the standby display.
When 'on', the alarm operates at the same time every day until turned off.
If a call is in progress at alarm time a
'Call in progress' alert beep sounds and a visual alert is displayed every
3 minutes. Validate or acknowledge the alarm in the usual way.
1
Press
No ring
, or any other key (except
Valid.
and
OK
) to snooze the alarm. The alarm
icons remain on the display and the alarm starts ringing again 3 minutes later.
Or press
Valid
or
OK
to acknowledge the alarm and stop the alarm clock process.
1
Press
OK
.
Select
Tools
.
2
Select
Alarm clock
.
3
Select
Off
.