Calls & times – MITSUBISHI ELECTRIC M342i User Manual
Page 30
30-
Calls & Times
To set a currency value per unit:
To set call cost type to units:
Setting the credit limit (subscription dependent)
You may also be able to set a credit limit to your calls. Once the credit limit has been reached, no
more chargeable outgoing or incoming calls are allowed. You can however still make emergency
calls.
The PIN2 code is required to set the credit limit.
Show costs
Call costs - resetting all costs to zero
To reset all call costs to zero:
1
Press
OK
.
Select
Calls & Times
.
2
Select
Call costs
.
3
Select
Display cost type
.
4
Select
Currency
. The current currency unit value is displayed.
5
Select
Modify
. Enter your PIN 2 code and press
OK
.
6
Enter the currency name (up to 3 letters). Press
OK
to validate.
7
Enter the unit cost (e.g.: 0.15 Euro per minute). And press
OK
to validate.
1
Press
OK
.
Select
Calls & Times
.
2
Select
Call costs
.
3
Select
Display cost type
.
4
Select
Units
.
When the cost type is set to units, the credit limit and the remaining credit are shown in units.
1
Press
OK
.
Select
Calls & Times
.
2
Select
Call costs
.
3
Select
Credit limit
. The display indicates the current credit limit set.
4
Select
Edit
. Enter your PIN 2 code and press
OK
.
5
Enter the credit limit (use to enter a decimal point for currencies). Press
OK
to validate.
When a credit limit has been set, the selection from the 'Credit limit' display is Edit or Set no limit.
1
Press
OK
.
Select
Calls & Times
.
2
Select
Call costs
.
3
Select
Show
.
4
Use up and down arrow keys to display the
Last Call
and
All Calls
or show the
Remaining
credits
.
The remaining credit is shown in either units or currency, as set by Cost Type menu above.
1
Press
OK
.
Select
Calls & Times
.
2
Select
Call costs
.
3
Select
Reset
.
4
Select
Yes
.
5
Enter the PIN 2 number and press
OK
.