MITSUBISHI ELECTRIC M342i - Manual (Page 64)

64-
Settings
Clock setting
To set the clocks:
Clocks swap
This feature is useful when travelling: the local clock is displayed but you can swap between
the origin clock and the secondary clock.
To swap clocks:
Default settings
You can reset your phone and return to your mobile default settings via the
Settings menu.
This has no effect on the phonebook entries or the phone lock code.
The following features are reset:
GSM services
Call diverting
This Network dependent service allows you to divert incoming calls (voice, fax or data calls) to
another number
To divert a call:
1 Press OK . Select Settings .
2 Select Phone settings .
3 Select Time & date .
4 Select the Origin clock. Scroll through the panels and enter fill in the required information.
5 Select Save to store the data.
6 Select the Secondary clock. Scroll through the panels and enter the required information.
7 Select Save to store the data.
1 Press OK . Select Settings .
2 Select Phone settings .
3 Select Time & date .
4 Select Swap .
An information message is displayed. The secondary clock becomes the origin/mobile clock
and the origin clock becomes the secondary one.
1 Press OK . Select Settings .
2 Select Phone settings
3 Select Default settings .
4 Select Yes (Set default ?)
FEATURE DEFAULT SETTING
Alert Modes Ring
Volumes, Ring, Key, Speech, Alarm Mid values
Backlight, Contrast Mid value
Any Key, Auto-Retry, Auto-Answer
features
Off
Ramping Off
1 Press OK . Select Settings .
2 Select GSM Services .
3 Select Call diverting . The following sub-menu is displayed (the contents of this menu may
vary according to your service provider).