MITSUBISHI ELECTRIC M342i - Manual (Page 9)

9-
Using this guide
Understanding the graphic display indicators (icons)
Up to eight character lines plus one icons line can be displayed on your mobile screen.
The icons indicate the phone state and operational conditions when in use.
The following icons may be displayed:
1 The list of elements to be entered is displayed. Scroll down to the field(s) you want to fill in
and press OK .
2 Enter the requested information or select the requested item and select OK to validate.
3 Fill in as many fields as necessary and select Save to store all the information entered.
The arrow keys displayed at the bottom of the screen show the scrolling possibilities.
SIM memory in use
Phone memory in use: refers to information from the phonebook cards.
GPRS service icon. This indicates that data packet services or connection to the i-mode
are available.
GPRS connection icon. This is displayed when a GPRS connection is in progress.
Roaming . This is displayed when the phone is connected to a network other than its
home network.
Call diverting . This indicates that all incoming calls are being diverted. Call diverting is
network dependent.
Alarm clock.
Vibrator alert.
Keypad lock.
Line 2
. This indicates that the second line is in use (subscription dependent).
Silent mode on.
Mute.
Auto-switch-off
mode on.
Infrared port . This indicates that the infrared port is active. i.e. that data can be received
via the infrared port.
Short message service (SMS) . This is displayed when one or more short messages
have been received and not yet read. flashes when the SMS message box is full
and no new message can be stored. SMS availability is network dependent.
Voice Mail. This is displayed when a Voice Mail message has been received and stored
by the networks Voice Mail centre. Voice Mail availability is network dependent.
Outgoing Call.
Incoming Call.
Withheld number. This is displayed when the caller does not wish his identity to be
shown.
Unanswered call . This is displayed when an incoming has not been answered.
Battery level indicator. This is permanently displayed to show the current battery
charge level. Five levels are shown: from full (5 bars) to low (one bar). If the icon
is empty, the mobile needs recharging.
Signal strength level . There are five strength levels. These show the strength of the
received signal. The more bars, the stronger the signal. If the network cannot be found,
no strength level is displayed.
Tegic edition mode.