Motorola MVME712B - Manual (Page 43)

Support Information
3-10 MVME712-12/-13/A/AM/B Transition Modules and LCP2 Adapter Board UserÕs Manual
3
10 DB04* DATA bus (bit 4)
11 GND GROUND
12 DB05* DATA bus (bit 5)
13 GND GROUND
14 DB06* DATA bus (bit 6)
15 GND GROUND
16 DB07* DATA bus (bit 7) - most signiÞcant bit and the
highest priority during the arbitration phase.
17 GND GROUND
18 DBP* DATA bus (parity) - data parity is odd. Use of
parity is a system option. Parity is not valid
during the arbitration phase.
19-24 GND GROUND
25 Not used.
26 TERMPWR TERMINATOR POWER
27-31 GND GROUND
32 ATN* ATTENTION - signal driven by the initiator.
Indicates the attention condition.
33-35 GND GROUND
36 BSY* BUS BUSY - OR-tied signal that indicates that
the bus is being used.
37 GND GROUND
38 ACK* ACKNOWLEDGE - signal driven by an initiator
to indicate an acknowledgment for a REQ/ACK
data transfer handshake.
39 GND GROUND
40 RST* RESET - OR-tied signal that indicates the RESET
condition.
41 GND GROUND
42 MSG* MESSAGE - signal driven by the target during
the message phase.
43 GND GROUND
44 SEL* SELECT - signal used by an initiator to select a
target or by a target to reselect an initiator.
45 GND GROUND
Table 3-6. Connector J3 Interconnect Signals (LCP2 Adapter) (Continued)
Pin
Number
Signal
Mnemonic
Signal Name and Description