Makita MAC2400 User Manual
Page 13
ROUTINE MAINTENANCE SCHEDULE
13
OWNERS MANUAL
MAKITA - MAC700 / MAC2400 / MAC5200
ROUTINE MAINTENANCE SCHEDULE
COLD WEATHER CONDITIONS
Drain water from the air tank, any moisture separators or transformers.
Check for any unusual noise and/or vibration.
Manually check all safety valves to make sure they are operating properly.
Inspect air filter, replace if necessary.
Inspect air lines and fittings for leaks; correct as necessary.
1)
2)
3)
4)
5)
Remove the oil filler plug.
Slowly pour the proper oil into the pump crankcase.
Always keep oil level in the middle of the sight glass.
1)
2)
3)
Remove the oil drain plug. Allow oil to drain completely.
Replace the oil drain plug (The use of a sealing compound or Teflon tape to
avoid leakage is recommended.)
Refill with the recommended oil to the proper level.
1)
2)
3)
Each year of operation or if a problem is suspected:
Filling with oil:
Changing the oil:
Note: Every 300 hours or 3 months, whichever comes first.
Check condition of air compressor pump intake and exhaust valves.
Check condition of check valve. Replace if damaged or worn out.
Ambient Temperatures at
Point of operation
SAE
Viscosity
ISO
Viscosity
-16°C TO 0°C (3.2°F - 32°F)
SAE 10W
ISO 32
1°C TO 26°C (33.8°F - 78.8°F)
SAE 20W
ISO 68
ABOVE 27°C (80.6°F)
SAE 30W
ISO 100