Macsense Connectivity XRouter Pro - Manual (Page 13)

3.3 Windows 95/98 TCP/IP Configuration of Computers
1. Double-click the Control Panel icon in My Computer folder.
2. In the Control Panel, double-click the Network icon. The network
interface card (installed on your computer) appears along with the
network protocol on the Configuration list.
3. Double-click TCP/IP protocol on the list. If TCP/IP does not
appear on the list, you must install the TCP/IP protocol first as
illustrated in step 4. Clients with TCP/IP already installed may skip
to step 5.
Figure 3.3-1
4. To install the TCP/IP protocol: (See Figure 3.3-1)
a. Keep your copy of Windows 95/98 CD-ROM on hand. (You will
need it for this installation.)
b. Click the Add button from the Configuration list of the Network
window. A new window appears.
c. Double-click Protocol. Then, in the Select Network Protocol
window, choose Microsoft on the Manufacturers list, and select
TCP/IP on the right side of the list. (See Figure 3.3-2)
8
Chapter 3 - EASY INSTALLATION