Macsense Connectivity XRouter Pro - Manual (Page 2)

Copyright
Copyright © 2000 by this company. All rights reserved. No part of this doc-
umentation may be reproduced in any form or by any means or used to
make any directive work (such as translation or transformation) without
permission from Xsense Connectivity, Inc. Xsense Connectivity, Inc.
reserves the right to revise this documentation and to make changes in
content without obligation among Xsense Connectivity, Inc. to provide noti-
fication of such revision or change.
All products and their associated features are subject to change or
upgrade at the time of the shipment or of the sales.
FCC Notice
This equipment has been tested and found to be FCC Rules certified.
These restrictions are designed to provide protection against harmful inter-
ference from residential installations. This equipment generates radio fre-
quencies that may cause interference with radio communications if not
used in accordance with the instructions. Interference may even occur
during proper installation. If this equipment causes interference, the user
is suggested to correct the it by one or more of the following:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit that is separate
from the one to which the receiver is connected.
4. Consult the dealer or an experienced radio/television technician for
help.
CE Declaration of Conformity
The equipment complies with the requirements relating to electromanetic
compatiblity, the essential protection requirement of Council Directive/EEC
on the approximation of the Member States relating to Electromangnetic
compatibility.
Trademarks
All products and Brand names are trademarks and/or registered trade-
marks of their respective companies.
I