MITSUBISHI ELECTRIC SR-HD5 - Manual (Page 74)

Mitsubishi SR-HD5 HD DIRECTV Plus Receiver
Page 7-14
When using the PreSelect™ To Tape feature, the following steps must be completed for the
HD receiver to perform unattended recording:
● Attach the VCR control cable as described in Chapter 2.
● Use the VCR SETUP utility as described earlier in this chapter.
● Switch the HD receiver to SD (480i) output mode.
● Set your VCR to match the output of the HD receiver, which could be either RF (channel
3 or 4) or A/V (audio left and right with video or S-video).
● Insert a recordable videotape of sufficient length in the VCR.
● Leave the VCR turned ON.
Editing an Event
The “Events” portion of the SCHEDULER screen displays up to seven scheduled events at one
time. If more than seven events are already scheduled, you can use either the key to scroll
down, or the
key to view the additional events. A small arrow at the top or bottom of the
event list indicates that there are additional events.
Once you have highlighted the event you wish to set or edit, press . You will be prompted
with a pop-up menu. If you choose the scheduling option, the HD receiver will turn on (if
necessary) and tune to the specified channel at the correct date and time. If the Schedule to Tape
option is provided and is chosen, and you have successfully completed the VCR setup procedure,
the HD receiver will allow recording of the event. To remove a scheduled event, select the Delete
option. If you inadvertently pressed
, select Cancel.
After choosing a scheduling option, a pop-up panel appears for channel selection. You can enter
the desired channel using either the number keys on the remote control or the and or
and keys.
After specifying a channel, press the key or select OK when you are ready to continue.
Next, enter a Start time using either the number keys on the remote control or the and keys.
Press to continue.
You then must specify whether the time you entered is AM or PM (or N for noon, or M for
midnight if the time specified is 12:00) using the and keys. To continue, press .
Using the same procedure as setting the start time, set the program Duration as hours and
minutes. As before, use to advance to the Frequency column.
The Frequency column is very versatile. Using the and keys, you can specify when, or how
often, the event occurs. Your choices are: Today, Tomorrow, Every Mon, Every Tue, Every Wed,
Every Thu, Every Fri, Every Sat, Every Sun, Everyday, Mon–Fri, or “/” to specify an exact date. If
you are specifying a date, enter the numbers using the remote control in month/day format. The
year will be set automatically. Events can be scheduled up to eleven months in advance. Once
you have set the Frequency, advance using the key.
Review your settings and choose OK. Otherwise, choose Cancel to delete the edits made to this
event.
▲
SELECT
SELECT
▲
▲
SELECT
▲
▲
▲
▲
▲ ▲
▲
▲
▲
▲