Marantz DV-12S1 - Manual (Page 23)

23
ENGLISH
To exit the FL menu
When you have compleated setting up the FL menu or if you
want exit the FL menu. Press SETUP to close the FL menu.
MEMO CONDITION
LAST MEMO CLEAR
ENTER
3 1 2
SETUP RETURN
MENU TOP MENU
REPEAT
POWER
SEARCH +10
VIDEO ADJ.
OPEN/CLOSE
DISPLAY
ANGLE
PROGRAM
AUDIO
A-B
F.MEMO
SUBTITLE
0
9 8 7
6 5 4
ENTER
Cursor
Control
Joystick
STOP
SETUP
Type
DVD
Video CD
CD, No disc
Format
NTSC
PAL
NTSC
PAL
Disc Output format
Position of TV SYSTEM
TVSYS NTSC TVSYS PAL TVSYS AUTO
NTSC MOD. PAL NTSC
PAL PAL
NTSC MOD. PAL NTSC
NTSC PAL PAL
NTSC PAL NTSC or PAL
About MOD. (Modulation) PAL
• SHRINK
Most models of the newly developed countdown PAL
TV system detect 50 Hz (PAL)/60 Hz (NTSC) and
automatically switch vertical amplitude, resulting in a
display without vertical shrinkage.
• If your PAL TV does not have a V-Hold control, you may
not be able to view NTSC disc because the picture may
roll. If the TV has a V-Hold control, adjust it until the
picture stops rolling. On some TVs, the picture may
shrink vertically, leaving black bands at the top and
bottom of the screen. This is not a malfunction; it is
caused by the NTSC
= PAL conversion.
Note
TV SYSTEM (except for USA model)
Video output changes as follows according to the
playback disc‘s recorded format.
NTSC = PAL, PAL = NTSC conversion is possible on
Video CDs. PAL = NTSC conversion is not possible on
DVDs. When the TV SYSTEM is set to the TVSYS AUTO
position, the disc’s format will be output as is. When a CD
or disc is not loaded, the previous video output format will
be selected.
Using the FL menu
The FL menu has been designed to set “TVSYSTEM” ,
“COMP VIDEO” , “AUTO P OFF” and “REMOT CODE” .
The FL menu can not be used if a disc is playing.
It is recommended to set the FL menu before loading a DVD.
If a DVD has been loaded, be sure to press STOP 7 twice
before proceeding.
(If “ RESUME ” is displayed in the FL display, press STOP 7.)
Selecting the FL menu
Press SETUP for longer than 1 sec.
The FL OFF indicator on the player turn on and off.
FL menu is displayed in the FL display.
Move the cursor control joystick down to select the FL menu
you want as follows.
(Example)
TVSYS PAL
TVSYS NTSC
TVSYS AUTO
TV SYSTEM setting (except for USA model)
Select TVSYSTEM, then press ENTER.
Move the cursor control joistick down to select the type of
TVSYSTEM you want to set as follows.
(Example)
* Factory setting
Press ENTER you want to set.
The menu select is set.
Note
When playing Video CDs, the TV SYSTEM setting has no effect
with playback stops.
TVSYSTEM (except for USA model)
COMP VIDEO
AUTO P OFF
REMOT CODE
FL OFF STANDBY
PAUSE
POWER
RANDOM DIMMER
PLAY STOP DVD PLAYER DV-12S1 OPEN/CLOSE VIDEO ON/OFF
TVSYSTEM
FL OFF FL menu
Setting Up the Pla
y
e
r
*