English – Marantz DV-12S1 User Manual
Page 51
51
ENGLISH
AD
V
ANCED FUNCTIONS
Searching for a Title/Group,
Chapter/Track, or Location
on a Disc
– DVD/Video CD/CD
This player offers different ways of accessing the information
on a DVD, Video CD or CD. Using
SEARCH MODE
, you can
search for titles or chapters on a DVD, tracks on a Video CD
or CD, and even select the point in time to start playback.
1
Press SEARCH repeatedly to select the type of
search.
The type of search changes with each press as follows.
Some DVD-Audio feature Browsable Pictures (page 66).
You can search the still image you want to see by
specifying the “page” number.
* The
[Frame Search]
option in the
Video
menu must be
[On]
to use this.(DVD)
2
Press the number button(s) of the desired title,
chapter or track or of the specific time where you
would like to begin playback.
• To select number 3, press
3
.
• To select number 10, press
1
and
0
.
• To select number 87, press
8
and
7
.
When performing a time/time & frame search:
(Frame search is only possible with DVD discs.)
• To select 21 minutes, 43 seconds, press
2, 1, 4,
and
3
.
• To select 1 hour, 14 minutes, press
7, 4, 0,
and
0
.
• To select 21 minutes, 43 seconds and 16 frames,
press
2, 1, 4,
3, 1
and
6
.
To perform a direct title/group or chapter/track search
using the number buttons
Press the number buttons while the disc is stopped to select
a title or group number.
Press the number buttons while the disc is playing to select a
chapter or track number.
•
To select number 3, press
3
.
•
To select number 10, press
+10
and
0
.
•
To select number 37, press
+10
,
+10
,
+10
and
7
.
Notes
• For some discs, selection can be made using the top menu on
the DVD. In this case, press
TOP MENU
to display the menu
screen and then make your selection.
• With some DVDs, the search operation may not be possible and
may stop shortly after being performed. In this case, the
mark is displayed.
• Time search is not possible with CDs.
• When performing DVD time search, playback may start from a
slightly different time than that specified.
• Time/time & frame search is not possible during when the disc is
stopped.
• Search using
SEARCH MODE
is not possible during PBC
playback of Video CDs.
• NTSC display 30 frames per seconds, number 0–29.
PAL display 25 frames per seconds, number 0–24.
The
Frame Search
option in the
Video
menu must be
[On]
to
use this. Press
DISPLAY
while a still picture is displayed to see
the frame number.
Depending on the disc, it may not be possible to search for a
specific frame. Also, when using frame advance, forward step or
reverse step, it may not possible to view every frame. Each frame
may not be appear in exact order when stepping through them.
The number assigned to a specific frame may be different when
stepping through the frames in forward or reverse mode.
3
Press PLAY
3
.
• Playback of the selected title/group or chapter/ track
starts.
• When a time search is performed, playback begins at
the appointed time.
• When you do a time & frame search, the selected
frame is displayed as a still.
3
Title/Group
3
Chapter/Track
Off
2
*(Time & frame)Time
2
MEMO
CONDITION
LAST MEMO
CLEAR
ENTER
3
1
2
SETUP
RETURN
MENU
TOP MENU
REPEAT
POWER
SEARCH
+10
VIDEO ADJ.
OPEN/CLOSE
DISPLAY
ANGLE
PROGRAM
AUDIO
A-B
F.MEMO
SUBTITLE
0
9
8
7
6
5
4
RC-12DVS1
2
1
3