Mercury PR0091 - Manual (Page 14)

Mercury 6-5 Stat – Installation & User Guide
Viewing
Apart from setting up the controller, you can also view the status of the inputs and outputs.
1. IO. View Inputs / Outputs and States
a. From the function menu, select “IO”, press enter
b. You can now scroll through the IO tables as set out below. The tables you view will depend
on the controller type configuration.
Input/Output table for 5 Channel Thermostat
Number IO Range Step Units
I-01 Probe 1 -42 to 128
o
C 0.1 Deg
I-02 Probe 2 -42 to 128
o
C 0.1 Deg
I-03 Probe 3 -42 to 128
o
C 0.1 Deg
I-04 Probe 4 -42 to 128
o
C 0.1 Deg
I-05 Probe 5 -42 to 128
o
C 0.1 Deg
I-06 Over-ride 1 0 (Off), 1 (On)
I-07 Over-ride 2 0 (Off), 1 (On)
I-08 Over-ride 3 0 (Off), 1 (On)
I-09 Over-ride 4 0 (Off), 1 (On)
I-10 Over-ride 5 0 (Off), 1 (On)
O-01 Relay 1 0 (Off), 1 (On)
O-02 Relay 2 0 (Off), 1 (On)
O-03 Relay 3 0 (Off), 1 (On)
O-04 Relay 4 0 (Off), 1 (On)
O-05 Relay 5 0 (Off), 1 (On)
O-06 Timer 0 (Off), 1 (On)
Display Messages
The following messages can appear on the Mercury display.
Display System status
on Controller On
Ensure that all power is
switched off before
installing or maintaining
this product
Revision 1.2 Page 14 of 21