Fuse, Cleaning – Mercury PR0091 User Manual
Page 20
Mercury 6-5 Stat – Installation & User Guide
Fuse:
The host equipment must provide a suitable external over-current protection device such as: -
Fuse:
6.3A, 240 Vac Antisurge (T) HRC conforming to IEC 60127 (Relay 4 & 5 fully loaded)
Or MCB:
8A, 240 Vac Type C conforming to BS EN 60898 (Relay 4 & 5 fully loaded)
Cleaning:
Do not wet the controller when cleaning. Clean the front by wiping with slightly damped lint free cloth.
Please note: The specifications of the product detailed on this set up guide may change without
notice. RDM Ltd shall not be liable for errors or for incidental or consequential damages, directly or
indirectly, in connection with the furnishing, performance or misuse of this product or document.
Ensure that all power is
switched off before
installing or maintaining
this product
Revision 1.2
Page 20 of 21