MTD TLP 2824-Z - Manual (Page 24)

24 TLP 2824-Z User Guide 980533-001 A
Getting Started
Operator Controls
Operator Controls
Power Switch
Press backward to turn ON or forward to OFF the printer.
Feed Button
• Tapping the Feed button forces the printer to feed one blank label.
• Holding the Feed button forces the printer to feed continuously.
• Pressing the Feed button takes the printer out of a “pause” condition. The printer is put
into “pause” by either a programming command or an error condition. See “What the
Status Light is Telling You” in the Troubleshooting chapter.
• Use the Feed button for printer setup and status (see “Feed Button Modes” in the
Troubleshooting chapter).
Status Light
Functions as a printer operational indicator (see “What the Status Light is Telling You” in the
Troubleshooting chapter).
Caution • The power should be turned off before connecting or disconnecting the
communications and power cables.